TES Workshop

Transition Edge Sensors (TES) Workshop

1EOr1A – TES Workshop: Calorimeters I [Oral]

Monday, October 24, 2022, 10:15 a.m. – 12:35 p.m.

10:15 a.m. – 10:20 a.m. Welcome Megan Eckart
10:20 a.m. – 10:50 a.m. 1EOr1A-01: [Invited] Progress Report on High-Efficiency Optical Transition Edge Sensors Adriana Lita
10:50 a.m. – 11:05 a.m. 1EOr1A-02: X-IFU Focal Plane Assembly Development Model for high resolution imaging X-ray spectrometers Emanuele Taralli
11:05 a.m. – 11:20 a.m. 1EOr1A-03: Improving Nuclear Materials Analysis Using Gamma-ray Microcalorimeters Joel Ullom
11:20 a.m. – 11:35 a.m. 1EOr1A-04: The next-generation of synchrotron-based Transition Edge Sensors: Deployment and operation at the National Synchrotron Light Source II Charles Titus
11:35 a.m. – 11:50 a.m. 1EOr1A-05: Extremely high resolution gamma ray spectrometer for the analysis of nuclear fuel and reactor materials Katherine Schreiber
11:50 a.m. – 12:05 p.m. 1EOr1A-06: Optimizing Low-Threshold, Gram-Scale TES Detectors for Neutrino Physics and Other Applications Enectali Figueroa-Feliciano
12:05 p.m. – 12:20 p.m. 1EOr1A-07: Development of transition edge sensors for the detection of secondary electrons Ryan Smith
12:20 p.m. – 12:35 p.m. Poster introductions, Speaker: various  


1EPo2F – TES Workshop: Calorimeters II [Poster]

Monday, October 24, 2022, 2:15 p.m. – 4:15 p.m.

1EPo2F-01 [E45] [Invited] Results from the First Deployed Ultra-High-Resolution Microcalorimeter Gamma Spectrometer Mark Croce
1EPo2F-02 [E46] Actinide chemical speciation from ultra-high-resolution cryogenic x-ray emissions spectroscopy Daniel McNeel
1EPo2F-03 [E47] Demonstration of a non-invasive back-reflection x-ray diffraction technique in the laboratory enabled by Transition-Edge Sensors Joseph Fowler
1EPo2F-04 [E48] Transition-edge sensor development for searching 1.5 eV dark photons with the MuDHI experiment Carlo Pepe
1EPo2F-05 [E49] High-resolution X-ray Compton spectroscopy using TES microcalorimeters: a direct and bulk sensitive probe of the redox orbitals in lithium batteries Tejas Guruswamy
1EPo2F-06 [E50] Development of 1 um transition edge sensors with Au-Ir bilayer Takeshi Jodoi
1EPo2F-08 [E51] Mapping Lithium Concentrations Using Compton Spectroscopy with Hard X-ray Transition Edge Sensors Tejas Guruswamy

1EOr2A – TES Workshop: Readout Techniques I [Oral]

Monday, October 24, 2022, 4:15 p.m. – 6:15 p.m.

4:15 p.m. – 4:30 p.m. 1EOr2A-01: Advances in time-division SQUID multiplexing for TES X-ray-microcalorimeter arrays Malcolm Durkin
4:30 p.m. – 4:45 p.m. 1EOr2A-02: Demonstration of simultaneous MMC readout using a tailored microwave SQUID multiplexer based readout system Mathias Wegner
4:45 p.m. – 5:00 p.m. 1EOr2A-03: Microwave SQUID multiplexers in the non-linear and non-equilibrium regime John Mates
5:00 p.m. – 5:15 p.m. 1EOr2A-04: Development of a 4 GHz bandwidth microwave SQUID multiplexer for large-format TES bolometer array readout John Groh
5:15 p.m. – 5:30 p.m. 1EOr2A-05: Direct observation of back-action noise in low-power SQUIDs designed for frequency domain multiplexed readout of TESs Jan van der Kuur
5:30 p.m. – 5:45 p.m. 1EOr2A-06: Status and deployment of next generation readout electronics for microwave multiplexed quantum sensors Jozsef Imrek
5:45 p.m. – 6:00 p.m. 1EOr2A-07: Demonstration of hybrid thermal-microwave multiplexing of transition-edge sensors Kelsey Morgan
6:00 p.m. – 6:15 p.m. 1EOr2A-08: Recent progress on digital frequency-domain multiplexed readout of transition edge sensors using SQUIDs at sub-kelvin temperature Tucker Elleflot

2EPo1C – TES Workshop: Readout Techniques II [Poster]

Tuesday, October 25, 2022, 8:45 a.m. – 10:45 a.m.

2EPo1C-01 [E16] [Invited] SQUID tandems for transition edge sensors Mikko Kiviranta
2EPo1C-02 [E17] [Invited] Test measurement results of a Xilinx RFSoC FPGA based readout system Jozsef Imrek
2EPo1C-03 [E18] Scalable TES and readout platform for next generation THz security camera Matthias Schmelz
2EPo1C-05 [E19] Demonstration of a two-stage SQUID amplifier for frequency domain multiplexing of TESs bolometers Amber Hornsby
2EPo1C-06 [E20] Development of a Modular Intermediate Frequency Conversion Chain for use with Microwave SQUID Multiplexing in the 4GHz to 8GHz Frequency Range Johnathon Gard
2EPo1C-07 [E21] Microwave SQUID multiplexed readout of position-sensitive magnetic micro-calorimeters Wonsik Yoon
2EPo1C-08 [E22] Integrated Superconducting Transition-Edge-Sensor Energy Readout (ISTER) Evan Golden
2EPo1C-09 [E23] 150GHz Thermal kinetic inductance detectors polarimetric camera: readout strategies, system engineering and integration with time domain multiplexing Lorenzo Minutolo

2EPo1D – TES Workshop: Fabrication and Packaging I [Poster]

Tuesday, October 25, 2022, 8:45 a.m. – 10:45 a.m.

2EPo1D-01 [E24] [Invited] Gamma-ray Transition-Edge Sensor with a Heavy-Metal Absorber Supported by a Thick-Trilayer Membrane Takahiro Kikuchi
2EPo1D-03 [E25] Ir film structural properties for TES application Lorenzo Ferrari Barusso
2EPo1D-04 [E26] Noise of the transition superconductor-normal conductor region in single crystal thin films YBa2Cu3O7-d-type and vortices dynamics Ahmed Taoufik
2EPo1D-07 [E27] Low loss dielectrics for high frequency components of superconducting detectors Marharyta Lisovenko
2EPo1D-08 [E28] Investigation of Superconducting Ti/Ti-Au/Au Trilayer Films with a Co-sputtering Process for Transition-Edge Sensors Hobey Garrone

2EOr1A – TES Workshop: Sensor Physics I  [Oral]

Tuesday, October 25, 2022, 10:45 a.m. – 12:30 p.m.

10:45 a.m. – 11:15 a.m. 2EOr1A-01: [Invited] Understanding the nature of the current-dependent resistance in transition-edge sensors Douglas Bennett
11:15 a.m. – 11:30 a.m. 2EOr1A-02: Engineering the Critical Temperature of Superconducting Bilayers Across Large Wafers Joel Weber
11:30 a.m. – 11:45 a.m. 2EOr1A-03: Fast Transition Edge Sensors for Photonic Quantum Computing Ruslan Hummatov
11:45 a.m. – 12:00 p.m. 2EOr1A-04: Progress in superconductor-ferromagnet thermoelectric detector development Ilari Maasilta
12:00 p.m. – 12:15 p.m. 2EOr1A-05: Biasless detection of electromagnetic radiation using a superconductor/ferromagnet heterostructure
Elia Strambini
12:15 p.m. – 12:30 p.m. Poster introductions, Speaker: various  

2EPo2D – TES Workshop: Sensor Physics II [Poster]

Tuesday, October 25, 2022, 2:15 p.m. – 4:15 p.m.

2EPo2D-01 [E25] [Invited] Two-Dimensional Position-Sensitive Transition-Edge-Sensor Microcalorimeters for Gamma Rays Tetsuya Tsuruta
2EPo2D-02 [E26] [Invited] Refinement of the transition-edge sensor design for ATHENA X-IFU Nicholas Wakeham
2EPo2D-03 [E27] Inductive Superconducting Transition Edge Detector (ISTED) – energy-resolving single photon detector Ling Hao
2EPo2D-04 [E28] X-ray response study of transition-edge sensors with an all-gold absorber in the soft x-ray regime Sang-Jun Lee
2EPo2D-07 [E29] Performance of high-resolution Mo/Cu transition edge sensors fabricated using a lift-off process Felix Jaeckel
2EPo2D-08 [E30] Microcalorimeter absorber optimization for 0.2 to 12 keV x-rays Edward Wassell

2EPo2E – TES Workshop: Fabrication and Packaging II [Poster]

Tuesday, October 25, 2022, 2:15 p.m. – 4:15 p.m.

2EPo2E-01 [E31] [Invited] Development of Superconducting Spectrometers for Line Intensity Mapping Thomas Cecil
2EPo2E-02 [E32] Integration of membrane-isolated detectors with high-density, buried, microstrip wiring Haruka Muramatsu
2EPo2E-03 [E33] Broadside-Coupled Niobium Flexible Cables James Chervenak
2EPo2E-04 [E34] Development of interlayer connections for large-scale superconducting detector arrays Thomas Cecil
2EPo2E-06 [E35] Examination of mid-infrared photon detection by hot electron bolometer with twin slot antenna Akira Kawakami
2EPo2E-08 [E36] Measurements of dielectric material loss from millimeter to centimeter wavelengths Zhaodi Pan

2EOr2A – TES Workshop: Kinetic Inductance Detector Applications [Oral]

Tuesday, October 25, 2022, 4:15 p.m. – 6:00 p.m.

4:15 p.m. – 4:30 p.m. 2EOr2A-01: Sub-millimeter wave kinetic inductance detectors with silicon-substrate feedhorns Jason Austermann
4:30 p.m. – 4:45 p.m. 2EOr2A-02: Utilizing nonlinear kinetic inductance to build Superconducting On-chip Fourier Transform Spectrometers Ritoban Basu Thakur
4:45 p.m. – 5:00 p.m. 2EOr2A-03: Characterization of NbTiN films with thicknesses below 20 nm for low power kinetic inductance amplifiers Andrea Giachero
5:00 p.m. – 5:15 p.m. 2EOr2A-04: SuperSpec for Future Far-IR Missions: Characterization of an On-chip Spectrometer with Aluminum KIDs Ryan McGeehan
5:15 p.m. – 5:30 p.m. 2EOr2A-05: Parallel plate capacitor Aluminum KIDs for Future Far-Infrared Space-Based Observatories Nicholas Cothard
5:30 p.m. – 5:45 p.m. 2EOr2A-06: Application of phonon-mediated superconducting Kinetic Inductance Detectors in the hunt for dark matter Karthik Ramanathan
5:45 p.m. – 6:00 p.m. 2EOr2A-07: Development and performance of kilopixel Kinetic Inductance Detectors and Focal Plane Assembly of The Terahertz Intensity Mapper Lun-Jun Liu

3EPo1C – TES Workshop: Sensor Physics III [Poster]

Wednesday, October 26, 2022, 10:00 a.m. – 12:00 p.m.

3EPo1C-01 [E19] [Invited] Long term performance stability of TES detectors Sophie Beaumont
3EPo1C-02 [E20] Transition Edge Sensor Bolometers for Microwave Cryogenic Absolute Power Measurements Shannon Duff
3EPo1C-03 [E21] Design of a transition-edge-sensor-based thermal stabilization stage Rachel Borrelli
3EPo1C-04 [E22] Experimental and theoretical determination of vibrational modes of transition-edge sensor microcalorimeter pixels for the ATHENA X-IFU instrument
Nicholas Wakeham
3EPo1C-05 [E23] Towards energy scale calibration and drift correction of TES detectors for Athena X-IFU Stephen Smith
3EPo1C-06 [E24] Parallel segmentation of the sensitive area of optical transition edge sensor Yuki Mitsuya
3EPo1C-07 [E25] High-resolution x-ray detectors for the Light Element Mapper Jennette Mateo

3EPo1D – TES Workshop: Analysis and Calibration [Poster]

Wednesday, October 26, 2022, 10:00 a.m. – 12:00 p.m.

3EPo1D-01 [E26] [Invited] Measuring the position dependence of large-area X-ray TES microcalorimeters with optical photons Avirup Roy
3EPo1D-02 [E27] Complex Impedance Measurements of Gamma-Ray Transition-Edge-Sensor Microcalorimeters Naoko Iyomoto
3EPo1D-03 [E28] Quantitative X-ray Fluorescence with Hard X-ray Transition Edge Sensors at the Advanced Photon Source Tejas Guruswamy
3EPo1D-04 [E29] Real time analysis of multiplexed TES x-ray pulses with no loss of resolution Galen O’Neil
3EPo1D-05 [E30] Initial quantum efficiency calibration of the x-ray absorbers on the XRISM Resolve detector array and prototype Athena X-IFU arrays Megan Eckart
3EPo1D-06 [E31] Online TES Calculator Hobey Garrone

3EPo2C – TES Workshop: Calorimeters III [Poster]

Wednesday, October 26, 2022, 2:30 p.m. – 4:30 p.m.

3EPo2C-01 [E16] [Invited] Measurements on a full-scale TES microcalorimeter array for the Athena X-IFU Kazuhiro Sakai
3EPo2C-02 [E17] Characterizing Thermal Background Events for Athena X-IFU Samuel Hull
3EPo2C-03 [E18] RES-NOVA – a supernovae cryogenic observatory Andrei Puiu
3EPo2C-04 [E19] Simulations of Two-dimensional Position-Sensitive Transition-Edge-Sensor Microcalorimeters for Gamma Rays Naoko Iyomoto
3EPo2C-05 [E20] Magnetic microcalorimeter sensors for decay-energy spectroscopy Stephen Boyd
3EPo2C-06 [E21] Development of low threshold dark matter detectors using MMCs Dohyung Kwon
3EPo2C-08 [E22] Antenna-Coupled Thermal Kinetic Inductance Detectors for millimeter-wave observations from a ground-based telescope Albert Wandui
3EPo2C-09 [E23] Development of a 240-pixel TES X-ray microcalorimeter array for STEM-EDS Tasuku Hayashi

3EPo2D – TES Workshop: Kinetic Inductance Detector Physics I  [Poster]

Wednesday, October 26, 2022, 2:30 p.m. – 4:30 p.m.

3EPo2D-01 [E24] [Invited] Noise Analysis of the Kinetic Inductance Parameteric Up-Converter (KPUP) Emily Linden
3EPo2D-02 [E25] [Invited] Strategies for reducing quasi particle GR noise in large arrays of mKIDs Juliang Li
3EPo2D-03 [E26] Progress on Flux Sensitive Kinetic Inductance Magnetometer (KIM)
Sasha Sypkens
3EPo2D-04 [E27] Parallel plate capacitor TiN KIDs for the Balloon Experiment for Galactic Infrared Science Nicholas Cothard
3EPo2D-05 [E28] Improving Energy Resolution of Microwave Kinetic Inductance Detectors via Reducing Athermal Phonon Loss Will Clay
3EPo2D-06 [E29] Electromagnetic Properties of Aluminum-based Bilayers for Kinetic Inductance Detectors Gensheng Wang
3EPo2D-10 [E30] Role of screening currents and vortices in determining the resonance frequency in YBCO coplanar resonator for Microwave Kinetic Inductance Detectors Ariel Roitman

3EOr2A – TES Workshop: Kinetic Inductance Detector Physics II  [Oral]

Wednesday, October 26, 2022, 4:30 p.m. – 6:15 p.m.

4:30 p.m. – 5:00 p.m. 3EOr2A-01: [Invited] Hydrogenated amorphous silicon with low two-level system noise and loss for KIDs and superconducting detector transmission line architectures Andrew Beyer
5:00 p.m. – 5:15 p.m. 3EOr2A-02: In-situ frequency tuning of superconducting micro-resonator arrays via nonlinear kinetic inductance and persistent current Michael Vissers
5:15 p.m. – 5:30 p.m. 3EOr2A-03: Monolithic Integration of Microwave Kinetic Inductance Detectors with Silicon Based Photonic Waveguides Majid Mohammad
5:30 p.m. – 5:45 p.m. 3EOr2A-04: Free Space Coupled MKIDs for FIR Detection Michael Vissers
5:45 p.m. – 6:00 p.m. 3EOr2A-05: Noise optimization for MKIDs with different design geometries and material selections Zhaodi Pan
6:00 p.m. – 6:15 p.m. 3EOr2A-06: Advances in kinetic inductance bolometers Juho Luomahaara

4EOr1A – TES Workshop: Bolometer Applications I [Oral]

Thursday, October 27, 2022, 9:00 a.m. – 10:30 a.m.

9:00 a.m. – 9:30 a.m. 4EOr1A-01: [Invited] Design and characterization of new 90 GHz detectors for the Cosmology Large Angular Scale Surveyor (CLASS) Carolina Núñez
9:30 a.m. – 9:45 a.m. 4EOr1A-02: MKID Array Development for the SPT-3G+ Focal Plane Karia Dibert
9:45 a.m. – 10:00 a.m. 4EOr1A-03: End to end tests of the AliCPT receiver Maria Salatino
10:00 a.m. – 10:15 a.m. 4EOr1A-04: Differentiating thermal and optical effects on superconducting transition edge sensing bolometers Rita Sonka
10:15 a.m. – 10:30 a.m. 4EOr1A-05: Optical leakage mitigation in superconducting ortho-mode transducer arrays Riccardo Gualtieri

4EPo1F – TES Workshop: Bolometer Applications II  [Poster]

Thursday, October 27, 2022, 10:30 a.m. – 12:30 p.m.

4EPo1F-01 [E43] [Invited] Transition-edge sensor multiplexing readout for double beta decay search Chiara Capelli
4EPo1F-03 [E44] Commercially fabricated horn antenna-coupled Transition Edge Sensor bolometer detectors for Cosmic Microwave Background polarimetry experiments Aritoki Suzuki
4EPo1F-04 [E45] Simons Observatory Universal Focal Plane Modules: Thermal Performance of the Array and Properties of TES Bias Circuit Kaiwen Zheng
4EPo1F-05 [E46] Detector Technologies for the Probe far-Infrared Mission for Astrophysics (PRIMA) Johannes Staguhn


4EOr2C – TES Workshop: Calorimeters IV [Oral]

Thursday, October 27, 2022, 2:30 p.m. – 4:00 p.m.

2:30 p.m. – 2:45 p.m. 4EOr2C-01: The NIST True-Becquerel Program: The direct realization of the becquerel with superconducting calorimeters Dan Schmidt
2:45 p.m. – 3:00 p.m. 4EOr2C-02: Large area light detectors with MMC readouts M.B. Kim
3:00 p.m. – 3:15 p.m. 4EOr2C-03: Ultra-High-Resolution Cryogenic X-Ray Spectrometer for Advanced Electron Microscope Actinide Material Mapping Matthew Carpenter
3:15 p.m. – 3:30 p.m. 4EOr2C-04: Effect of space radiation on TES detectors performance Sophie Beaumont
3:30 p.m. – 3:45 p.m. 4EOr2C-05: TOMCAT+: a tomographic nanoscale circuit analysis tool featuring a 3,000 element transition-edge sensor x-ray spectrometer Paul Szypryt
3:45 p.m. – 4:00 p.m. 4EOr2C-06: Determining the origin of orbital angular momentum in ferromagnetic La0.7Sr0.3MnO3: X-ray magnetic circular dichroism via resonant inelastic x-ray scattering with TES spectrometer Jun-Sik Lee


5EOr1A – TES Workshop: Sensor Physics IV [Oral]

Friday, October 28, 2022, 8:00 a.m. – 9:30 a.m.

8:00 a.m. – 8:15 a.m. 5EOr1A-01: Ultra-Low Noise TES Bolometers for Future Far-Infrared Spectroscopy Jake Connors
8:15 a.m. – 8:30 a.m. 5EOr1A-02: Development of TES Microcalorimeters Designed for 14.4 keV Solar Axion Search Yuta Yagi
8:30 a.m. – 8:45 a.m. 5EOr1A-03: Improved transition-edge sensor microcalorimeter readout with a kinetic inductance traveling-wave parametric amplifier Maxime Malnou
8:45 a.m. – 9:00 a.m. 5EOr1A-04: Suppression of Cosmic Ray Muons using Tungsten TES Detectors on Membrane Tannaz Farrahi
9:00 a.m. – 9:15 a.m. 5EOr1A-05: Low-threshold wide-area photon calorimeter with Ir/Pt bilayer transition-edge sensors for next-generation nuclear and particle physics experiments Chiara Capelli
9:15 a.m. – 9:30 a.m. 5EOr1A-06: The TES-based Cryogenic Anti-Coincidence detector of ATHENA X-IFU: Calibration and Thermal modeling validation via the on-chip heaters Matteo D’Andrea

5EOr2B – TES Workshop: Fabrication and Packaging III [Oral]

Friday, October 28, 2022, 9:45 a.m. – 11:15 a.m.

9:45 a.m. – 10:00 a.m. 5EOr2B-01: Large, thin corrugated gold absorbers for TESs Conjeepuram Ambarish
10:00 a.m. – 10:15 a.m. 5EOr2B-02: Fabrication of µ-Spec Spectrometers for Experiment for Cryogenic Large-aperture Intensity Mapping (EXCLAIM) Mona Mirzaei
10:15 a.m. – 10:30 a.m. 5EOr2B-03: Development of Hafnium transition edge sensor bolometers for cosmic microwave background polarimetry experiments Kaja Rotermund
10:30 a.m. – 10:45 a.m. 5EOr2B-04: Alignment of optical fiber array to a small 1D-array of optical transition edge sensors Negar Otrooshi
10:45 a.m. – 11:00 a.m. 5EOr2B-05: Development and Characterization of Indium Bump Bonding Processes for Superconducting Devices Dan Schmidt
11:00 a.m. – 11:15 a.m. 5EOr2B-06: Optimizations of RF Enclosure Geometry in Microwave Multiplexer Arrays Maximiliano Silva-Feaver
Copyright 2022 Applied Superconductivity. All rights reserved